I/O Board Specifications
The I/O (Input/Output) Board is populated with the components required to implement an oscilloscope, function generator, spectrum analyzer, multimeter, and digital input/output control. The hardware is powered by the user's PC connected via a USB cable; thus eliminating the need for a bulky AC transformer.
RED2 I/O Board (Rev D - Pinout Diagram)
RED2 I/O Board
32bit, 200MHz Blackfin processor with 128K of memory
2-channel, 1.5 MSPS per channel, 12-bit ADC (Scope/Spectrum Analyzer)
2 14-bit, 1.4 MSPS per channel DACs (Function Generation/Arbitrary Wave Generation)
USB 2.0 High-Speed (480Mbps)
16-channels of digital (3.3V) I/O
2 dedicated Pulse-Width Modulation (PWM) channels
Expanded input voltage range
250kSPS Impedance Analyzer
2.5GHz, 1Mbps Wireless Transceiver
BLUE1 I/O Board
BLUE1 I/O Board (Rev D - Pinout Diagram)
32bit, 200MHz Blackfin processor with 128K of memory
2-channel, 30MSPS, 14-bit ADC
2-channel, 14-bit DAC
USB 2.0 High-Speed (480Mbps)
2-channel, 1MHz function generator (sine, triangle, square)
16-channels of digital (3.3V) I/O
RED1 I/O Board (Rev D - Pinout Diagram)
45MHz ARM7 Core
12-channel, 1MSPS, 12-bit ADC
4-channel, 12-bit DAC
USB 2.0 High-Speed (480Mbps)
2-channel, 500kHz function generators (sine, triangle, square)
16-channels of digital (3.3V) I/O
Two input channels accept +/- 10V, the rest accept 0-2.5V
First input channel includes hardware triggering
RED1 I/O Board